Omnikit
DevFilesMoneyAll toolsExams
Ctrl K
Dev toolsFile toolsMoney calculatorsAll toolsExams
HomeDeveloper toolsInternet Speed Test

Internet Speed Test

dev

Measure download, upload, latency and jitter between your browser and our server in India

Times random test data to and from our server in India. Nothing you type is sent, and nothing is stored. Checked against sources on 21 Nov 2026.
What this does
Measure download, upload, latency and jitter between your browser and our server in India.
What it does not do
It does not keep what you look up, apart from the 30-day request log. It does not need an account or a sign-in.
What leaves your browser
This tool sends random test data to our server in India and downloads random test data from it, to time your connection; nothing you type is sent, and nothing is stored. The page also sends a usage count: the tool’s name and the action, never the content.

Checked against the tool’s code on 18 November 2026. Figures read from their sources on 21 November 2026. What we collect

An internet speed test times how fast data moves between your device and a server. This page downloads random test data from our server in India, uploads test data back, and times 10 tiny round trips, then shows download and upload in Mbps and latency and jitter in milliseconds. It measures that path, not the speed your provider advertises.

What a measured speed is enough for, per stream (the services’ own recommendations)
UseDownloadUpload
HD video (720p)3 Mbps-
Full HD video (1080p)5 Mbps-
4K video15 Mbps-
Group HD video calls (720p)1.8 Mbps2.6 Mbps
Sources: Netflix Help Center and Zoom Support, checked 21 Nov 2026. Upload is sent in pieces of at most 1,000,000 bytes, which our server counts and discards.

This tool sends random test data to our server in India and downloads random test data from it, to time your connection; nothing you type is sent, and nothing is stored. Which tools call a server

Next:
  • Regex Tester Test JavaScript regular expressions with live highlighting and a plain-English explanation
  • Test Credit Card Numbers Sandbox card numbers from Stripe and Razorpay with expiry and CVV, and a Luhn checker
  • JSON Schema Validator Validate JSON against a JSON Schema (2020-12, 2019-09, draft 7), with each error located

How to test my internet speed

1

Close other downloads and video on the same connection, then press Start test.

2

Wait about 17 seconds while it measures latency, then download, then upload.

3

Read download and upload in Mbps and latency and jitter in milliseconds.

4

Press Copy result to paste the figures into a support ticket, or Run again on another device or Wi-Fi band.

About the Internet Speed Test

Press Start test and the page does three things in turn. It times ten tiny round trips to our server and reports the lowest, the median and the jitter, dropping the first because it includes opening the connection. It then downloads random bytes for about eight seconds over three requests at once, growing each request so it takes about a second and a half. Finally it uploads random bytes for about six seconds in pieces of at most a million bytes, which our server counts and throws away.

The first second of each phase is not counted: a new connection starts slowly (TCP slow start), and counting it would make every line read low. This follows RFC 6349, the method framework for TCP throughput testing, and the notes of M-Lab's NDT test.

What the figure means

The result is the speed between your browser and one server, ours, in India. A faraway server, a busy Wi-Fi channel, other devices downloading, a VPN or an old router all lower it, so it can be well below the plan your provider sells, which is the speed to their own network. Run it twice, close to the router and further away, to see where the slowdown sits.

What is sent and kept

Only test data made up by the page goes up; nothing you type, no file. Nothing is stored except the anonymous count that a test was run, and every reply is marked so no cache keeps it.

Frequently asked questions

How do I check my internet speed?

Press Start test on this page. It measures latency first, then download for about eight seconds and upload for about six, and shows the figures in Mbps and milliseconds. Close other downloads and video on the same connection first, or they share the line and the result reads low.

Why is my speed test result lower than my plan?

A provider sells the speed to its own network. This test measures the whole path from your browser to our server in India, including your Wi-Fi, your router, other devices on the line and the route between networks. Wi-Fi far from the router, a VPN or a busy evening hour often account for most of the gap.

What is a good internet speed?

A good speed depends on use. Netflix recommends 3 Mbps per stream for HD, 5 Mbps for Full HD and 15 Mbps for 4K. Zoom lists 1.8 Mbps down and 2.6 Mbps up for 720p group video calls. A household adds those up for everything used at the same time.

What are ping and jitter?

Ping, or latency, is how long a tiny message takes to reach a server and come back, in milliseconds. Jitter is how much that time changes from one message to the next. Both matter more than raw speed for games and video calls; low and steady is what you want.

Does this speed test upload my files or store my data?

No. The upload sends random test data made up by the page, in pieces of at most a million bytes, and our server counts and discards each piece. Nothing you type or own is sent, and nothing is stored except the anonymous count that a test was run.

Why does a speed test give different results each time?

Other traffic on your network and on the route changes from second to second, and Wi-Fi signal varies as you move. Run the test two or three times and read the typical figure. Testing over a cable next to the router shows what the line itself delivers.

Sources

  • RFC 6349, Framework for TCP Throughput TestingThroughput measured after slow start, over several TCP streams, as bytes over time
  • M-Lab, NDT (Network Diagnostic Tool) methodologyA browser speed test measures the path to one server, not the line speed a provider sells
  • RFC 3550, RTP (interarrival jitter)Jitter as the change in delay from one packet to the next
  • Netflix Help Center, Netflix-recommended internet speeds3 Mbps for HD, 5 Mbps for Full HD, 15 Mbps for 4K per stream
  • Zoom Support, Zoom system requirements: Windows, macOS, Linux2.6 Mbps up and 1.8 Mbps down for 720p HD group video calls

Last verified 21 November 2026.

Rates and rules change; check the source before you rely on a figure.

Still stuck? Ask about Internet Speed Test and anybody who knows can answer. No account needed.

Common uses

  • Wi-Fi Speed TestCheck how fast your Wi-Fi is: download, upload and latency in one press
  • Ping and Jitter TestMeasure latency and jitter to our server for gaming and video calls

Same job, other tools: Link Preview Checker – Find the missing tag behind a WhatsApp or Slack link with no picture · Readability Checker – Flesch reading ease and grade level, with what to change · User-Agent String Checker – Check what a user-agent string can and cannot tell you before you rely on it.

On the related tools: JSONPath Evaluator – Evaluate a JSONPath expression and get the matching values and their paths.

On the same topic: What Is My IP Address – See the public IP address websites see for your connection, IPv4 or IPv6, and copy it · Ping Test – Ping a host or IP from our server: 4 replies with min, average and max time · WebRTC Leak Test – See which IP addresses WebRTC hands to websites, and whether your VPN is being bypassed.

Related tools

All developer tools
Regex TesterTest JavaScript regular expressions with live highlighting and a plain-English explanationDiff CheckerCompare two texts side by side and see every added and removed lineJSON DiffCompare two JSON documents and list every added, removed and changed valueOpen Graph PreviewPaste a page and see the share card for Facebook, LinkedIn, X, WhatsApp and SlackKeyword Density and ReadabilityWord and phrase counts, densities, reading time and a Flesch readability scoreHTTP Status CodesEvery HTTP status code, what it means, when to send it and the RFC it comes fromUser-Agent ParserRead a user-agent string: browser, engine, OS, device type and whether it is a botJSONPath TesterRun RFC 9535 JSONPath queries on pasted JSON and see every match highlighted
Was this tool helpful?
Omnikit

Small jobs, done in your browser. Free, fast and private. Files are never uploaded.

Files

  • Compress Image
  • Image to PDF
  • Merge PDF
  • Compress PDF
  • PDF to Word
  • Word to PDF

Dev

  • JSON Formatter & Validator
  • Base64 Encode & Decode
  • JWT Decoder, Verifier & Encoder
  • Password Generator
  • UUID Generator
  • Unix Timestamp Converter

Money

  • SIP Calculator
  • EMI Calculator
  • GST Calculator
  • FD Calculator
  • PPF Calculator
  • Lumpsum Calculator

Site map: Files · Dev · Money

GuidesQuestionsAboutHow we checkLaw library (beta)PrivacyTermsDisclosureContactMore: Exam practice (UGC NET, MH-SET, PhD entrance, CSIR NET)Times random test data to and from our server; nothing you type is sent and nothing is stored. © 2026 Omnikit (theomnikit.com)