Change the frame rate of an SRT or VTT subtitle, such as 23.976 to 25 fps
Processed in your browser. Nothing is uploaded. Checked against sources on 16 Nov 2026.Checked against the tool’s code on 18 November 2026. Figures read from their sources on 16 November 2026. What we collect
A subtitle FPS converter fixes subtitles that start in sync and drift further off. Converting the example from 23.976 to 25 fps multiplies every time by 0.959041, so the last line moves from 01:30:00,000 to 01:26:18,821, 221.2 seconds earlier, because a 25 fps copy runs 4.1 per cent faster. SRT and VTT, read in your browser.
| From | To | Times multiplied by | Line at 1:30:00 moves to |
|---|---|---|---|
| 23.976 fps | 25 fps | 0.959041 | 01:26:18,821 |
| 25 fps | 23.976 fps | 1.042708 | 01:33:50,625 |
| 24 fps | 25 fps | 0.960000 | 01:26:24,000 |
| 25 fps | 24 fps | 1.041667 | 01:33:45,000 |
| 29.97 fps | 23.976 fps | 1.250000 | 01:52:30,000 |
| 23.976 fps | 24 fps | 0.999001 | 01:29:54,605 |
Nothing is uploaded: this runs in your browser.
Press Choose .srt or .vtt, or paste the subtitle text; it is read on your device.
Under Subtitle made for, pick the rate the subtitle was timed on, often 23.976.
Under Your video runs at, pick your video's rate, often 25 for a European copy.
Press Download to save the re-timed file in the same format.
A subtitle that is late by two seconds at the start and two seconds at the end needs a time shift: every line moves by the same amount. A subtitle that is right at the start and minutes off by the end needs a frame-rate change: it was timed on a copy of the film that runs at a different speed.
The usual case is film shot at 24 frames per second. Web and Blu-ray releases play it at 23.976 (24000/1001), while European television and DVDs play the same frames at 25, about 4 per cent faster. A two-hour film is nearly five minutes shorter at 25 fps, so a subtitle made for one copy ends minutes early or late on the other. The converter multiplies every start and end time by the ratio of the two rates, using the exact fractions.
| Question | Answer |
|---|---|
| Formats | SRT and VTT in, the same format out |
| Rates | 23.976, 24, 25, 29.97, 30, 50, 59.94 and 60 fps |
| The rule | New time = old time x (subtitle rate / video rate) |
| Example | 23.976 to 25 fps: 01:30:00,000 becomes 01:26:18,821 |
| Limits | One file up to 20 MB, read in your browser, never uploaded |
Checked on 16 November 2026 against ITU-R Recommendation BT.470 for the 25 and 29.97 frame rates. Page last updated on 16 November 2026.
The subtitle's rate is often in its file name (25fps, PAL, NTSC). The video's rate is in your player's media information. If the lines run ahead more and more, the video is slower than the subtitle; pick the pair the other way round. For a fixed delay instead, use fix subtitle delay; to turn SRT into VTT, the subtitle converter.
The subtitle was timed on a copy of the video with a different frame rate, usually 23.976 fps against 25 fps. The two copies run at different speeds, so the gap grows minute by minute. Converting the frame rate rescales every time and brings the whole file back in step.
Open the .srt file, choose 23.976 under Subtitle made for and 25 under Your video runs at, then download. Every time is multiplied by 0.959041, so a line at 01:30:00,000 moves to 01:26:18,821. The file is read in your browser and never leaves your device.
Check the first and the last line. Late or early by the same amount at both ends calls for a time shift. Right at the start but wrong by the end calls for a frame-rate change. When both are off, change the frame rate first, then shift the result.
Media players show it: in VLC open Tools, Media Information, Codec; in MPC-HC open Properties. The subtitle's rate is often in its file name, such as 25fps or PAL. Common pairs are 23.976 with 25 and 24 with 25, both about 4 per cent apart.
Yes. A WebVTT file is read the same way and written back as WebVTT, with its cue names and settings kept. An SRT file is written back as SRT. The format is recognised from the contents, not from the file name, so a renamed file still works.
Exactly 24000/1001 frames per second, which is 23.976023... The NTSC rates 29.97 and 59.94 are likewise 30000/1001 and 60000/1001. The converter uses these exact fractions, so a long film does not collect a rounding error that a rate of 23.976 typed in would add.
Rates and rules change; check the source before you rely on a figure.
Still stuck? Ask about Subtitle FPS Converter: SRT Frame Rate Change Online and anybody who knows can answer. No account needed.
Same job, other tools: Fix Subtitle Delay – Correct subtitles that appear a few seconds after the dialogue · SRT to VTT Converter – Turn an SRT file into the WebVTT format a web player needs.
On the related tools: Dummy Text Generator – Fill a layout with neutral dummy text of the length you need.
On the same topic: Subtitle Converter – Convert SRT to VTT or back, and shift the timing of subtitles that run early or late.